diff options
Diffstat (limited to 'gtk+-mingw/bin/gettextize')
| -rw-r--r-- | gtk+-mingw/bin/gettextize | 1281 |
1 files changed, 1281 insertions, 0 deletions
diff --git a/gtk+-mingw/bin/gettextize b/gtk+-mingw/bin/gettextize new file mode 100644 index 0000000..0df2d58 --- /dev/null +++ b/gtk+-mingw/bin/gettextize @@ -0,0 +1,1281 @@ +#! /bin/sh +# +# Copyright (C) 1995-1998, 2000-2010 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +# This file is meant for authors or maintainers which want to +# internationalize their package with the help of GNU gettext. For +# further information how to use it consult the GNU gettext manual. + +progname=$0 +package=gettext-tools +version=0.18.1 + +# Set variables +# - gettext_dir directory where the sources are stored. +prefix="/MinGW" +datarootdir="${prefix}/share" +gettext_dir="${datarootdir}/gettext" + +# func_tmpdir +# creates a temporary directory. +# Sets variable +# - tmp pathname of freshly created temporary directory +func_tmpdir () +{ + # Use the environment variable TMPDIR, falling back to /tmp. This allows + # users to specify a different temporary directory, for example, if their + # /tmp is filled up or too small. + : ${TMPDIR=/tmp} + { + # Use the mktemp program if available. If not available, hide the error + # message. + tmp=`(umask 077 && mktemp -d "$TMPDIR/gtXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" + } || + { + # Use a simple mkdir command. It is guaranteed to fail if the directory + # already exists. $RANDOM is bash specific and expands to empty in shells + # other than bash, ksh and zsh. Its use does not increase security; + # rather, it minimizes the probability of failure in a very cluttered /tmp + # directory. + tmp=$TMPDIR/gt$$-$RANDOM + (umask 077 && mkdir "$tmp") + } || + { + echo "$0: cannot create a temporary directory in $TMPDIR" >&2 + { (exit 1); exit 1; } + } +} + +# Support for relocatability. +func_find_curr_installdir () +{ + # Determine curr_installdir, even taking into account symlinks. + curr_executable="$0" + case "$curr_executable" in + */* | *\\*) ;; + *) # Need to look in the PATH. + if test "${PATH_SEPARATOR+set}" != set; then + func_tmpdir + { echo "#! /bin/sh"; echo "exit 0"; } > "$tmp"/conf.sh + chmod +x "$tmp"/conf.sh + if (PATH="/nonexistent;$tmp"; conf.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -rf "$tmp" + fi + save_IFS="$IFS"; IFS="$PATH_SEPARATOR" + for dir in $PATH; do + IFS="$save_IFS" + test -z "$dir" && dir=. + for exec_ext in ''; do + if test -f "$dir/$curr_executable$exec_ext"; then + curr_executable="$dir/$curr_executable$exec_ext" + break 2 + fi + done + done + IFS="$save_IFS" + ;; + esac + # Make absolute. + case "$curr_executable" in + /* | ?:/* | ?:\\*) ;; + *) curr_executable=`pwd`/"$curr_executable" ;; + esac + # Resolve symlinks. + sed_dirname='s,/[^/]*$,,' + sed_linkdest='s,^.* -> \(.*\),\1,p' + while : ; do + lsline=`LC_ALL=C ls -l "$curr_executable"` + case "$lsline" in + *" -> "*) + linkdest=`echo "$lsline" | sed -n -e "$sed_linkdest"` + case "$linkdest" in + /* | ?:/* | ?:\\*) curr_executable="$linkdest" ;; + *) curr_executable=`echo "$curr_executable" | sed -e "$sed_dirname"`/"$linkdest" ;; + esac ;; + *) break ;; + esac + done + curr_installdir=`echo "$curr_executable" | sed -e 's,/[^/]*$,,'` + # Canonicalize. + curr_installdir=`cd "$curr_installdir" && pwd` +} +func_find_prefixes () +{ + # Compute the original/current installation prefixes by stripping the + # trailing directories off the original/current installation directories. + orig_installprefix="$orig_installdir" + curr_installprefix="$curr_installdir" + while true; do + orig_last=`echo "$orig_installprefix" | sed -n -e 's,^.*/\([^/]*\)$,\1,p'` + curr_last=`echo "$curr_installprefix" | sed -n -e 's,^.*/\([^/]*\)$,\1,p'` + if test -z "$orig_last" || test -z "$curr_last"; then + break + fi + if test "$orig_last" != "$curr_last"; then + break + fi + orig_installprefix=`echo "$orig_installprefix" | sed -e 's,/[^/]*$,,'` + curr_installprefix=`echo "$curr_installprefix" | sed -e 's,/[^/]*$,,'` + done +} +if test "no" = yes; then + exec_prefix="${prefix}" + bindir="${exec_prefix}/bin" + orig_installdir="$bindir" # see Makefile.am's *_SCRIPTS variables + func_find_curr_installdir # determine curr_installdir + func_find_prefixes + # Relocate the directory variables that we use. + gettext_dir=`echo "$gettext_dir/" | sed -e "s%^${orig_installprefix}/%${curr_installprefix}/%" | sed -e 's,/$,,'` +fi + +# func_usage +# outputs to stdout the --help usage message. +func_usage () +{ + echo "\ +Usage: gettextize [OPTION]... [package-dir] + +Prepares a source package to use gettext. + +Options: + --help print this help and exit + --version print version information and exit + -f, --force force writing of new files even if old exist + --intl install libintl in a subdirectory (deprecated) + --po-dir=DIR specify directory with PO files + --no-changelog don't update or create ChangeLog files + --symlink make symbolic links instead of copying files + -n, --dry-run print modifications but don't perform them + +Report bugs to <bug-gnu-gettext@gnu.org>." +} + +# func_version +# outputs to stdout the --version message. +func_version () +{ + echo "$progname (GNU $package) $version" + echo "Copyright (C) 1995-1998, 2000-2010 Free Software Foundation, Inc. +License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> +This is free software: you are free to change and redistribute it. +There is NO WARRANTY, to the extent permitted by law." + echo "Written by" "Ulrich Drepper" +} + +# func_fatal_error message +# outputs to stderr a fatal error message, and terminates the program. +func_fatal_error () +{ + echo "gettextize: *** $1" 1>&2 + echo "gettextize: *** Stop." 1>&2 + exit 1 +} + +# Nuisances. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Command-line option processing. +# Removes the OPTIONS from the arguments. Sets the variables: +# - force 1 if --force was given, 0 otherwise +# - intldir yes if --intl was given, empty otherwise +# - podirs list of directories specified with --po-dir +# - try_ln_s : if --symlink was given, false otherwise +# - do_changelog false if --no-changelog was given, : otherwise +# - doit false if --dry-run was given, : otherwise +{ + force=0 + intldir= + podirs= + try_ln_s=false + do_changelog=: + doit=: + + while test $# -gt 0; do + case "$1" in + -c | --copy | --cop | --co | --c ) # accepted for backward compatibility + shift ;; + -n | --dry-run | --dry-ru | --dry-r | --dry- | --dry | --dr | --d ) + shift + doit=false ;; + -f | --force | --forc | --for | --fo | --f ) + shift + force=1 ;; + --help | --hel | --he | --h ) + func_usage; exit 0 ;; + --intl | --int | --in | --i ) + shift + intldir=yes ;; + --po-dir | --po-di | --po-d | --po- | --po | --p ) + shift + if test $# = 0; then + func_fatal_error "missing argument for --po-dir" + fi + case "$1" in + -*) func_fatal_error "missing argument for --po-dir" ;; + esac + podirs="$podirs $1" + shift ;; + --po-dir=* ) + arg=`echo "X$1" | sed -e 's/^X--po-dir=//'` + podirs="$podirs $arg" + shift ;; + --no-changelog | --no-changelo | --no-changel | --no-change | --no-chang | --no-chan | --no-cha | --no-ch | --no-c ) + shift + do_changelog=false ;; + --symlink | --symlin | --symli | --syml | --sym | --sy | --s ) + shift + try_ln_s=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v ) + func_version + exit 0 ;; + -- ) # Stop option prcessing + shift; break ;; + -* ) + echo "gettextize: unknown option $1" 1>&2 + echo "Try 'gettextize --help' for more information." 1>&2 + exit 1 ;; + * ) + break ;; + esac + done + # podirs defaults to "po". + test -n "$podirs" || podirs="po" +} + +# Warn about deprecated options. +if test -n "$intldir"; then + echo "gettextize: warning: the option '--intl' is deprecated and will be removed" 1>&2 +fi + +# Command-line argument processing. +# Analyzes the remaining arguments. +# Sets the variables +# - origdir to the original directory, +# - srcdir to the package directory, and cd-s into it. +{ + if test $# -gt 1; then + func_usage 1>&2 + exit 1 + fi + origdir=`pwd` + if test $# -eq 1; then + srcdir=$1 + if cd "$srcdir"; then + srcdir=`pwd` + else + func_fatal_error "Cannot change directory to '$srcdir'." + fi + else + srcdir=$origdir + fi +} + +# The current directory is now $srcdir. + +# Check integrity of package: A configure.in/ac must be present. Sets variable +# - configure_in name of configure.in/ac file. +test -f configure.in || test -f configure.ac || + func_fatal_error "Missing configure.in or configure.ac, please cd to your package first." +configure_in=NONE +if test -f configure.in; then + configure_in=configure.in +else + if test -f configure.ac; then + configure_in=configure.ac + fi +fi + +# Check whether the --force option is needed but has not been specified. +if test $force -eq 0; then + if test -d intl; then + func_fatal_error "intl/ subdirectory exists: use option -f if you really want to delete it." + fi + for podir in $podirs; do + if test -f "$podir/Makefile.in.in"; then + func_fatal_error "$podir/Makefile.in.in exists: use option -f if you really want to delete it." + fi + done + if test -f ABOUT-NLS; then + func_fatal_error "ABOUT-NLS exists: use option -f if you really want to delete it." + fi +fi + +# Check in which directory config.rpath etc. belong. +auxdir=`cat "$configure_in" | grep '^AC_CONFIG_AUX_DIR' | sed -n -e 's/AC_CONFIG_AUX_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q` +if test -n "$auxdir"; then + auxdir="$auxdir/" +fi + +# For simplicity we change to the gettext source directory. +cd "$gettext_dir" || + func_fatal_error "gettext source directory '${gettext_dir}' doesn't exist" + +# Variables which keep track what has been modified. +added_directories= +removed_directory= +added_extradist= +added_acoutput= +removed_acoutput=" intl/intlh.inst" + +# Variable: +# - please accumulates instructions for the user. +please= + +# Variable: +# - date current date, for use in ChangeLog entries. +date=`date +%Y-%m-%d` + +# func_copy from to +# copies a file. +# 'from' is a relative pathname, relative to the current directory. +# 'to' is a relative pathname, relative to $srcdir. +func_copy () +{ + if $doit; then + rm -f "$srcdir/$2" + echo "Copying file $2" + cp "$1" "$srcdir/$2" + else + echo "Copy file $2" + fi +} + +# func_linkorcopy from absfrom to +# links or copies a file. +# 'from' is a relative pathname, relative to the current directory. +# 'absfrom' is the corresponding absolute pathname. +# 'to' is a relative pathname, relative to $srcdir. +func_linkorcopy () +{ + if $doit; then + rm -f "$srcdir/$3" + ($try_ln_s && ln -s "$2" "$srcdir/$3" && echo "Symlinking file $3") 2>/dev/null || + { echo "Copying file $3"; cp "$1" "$srcdir/$3"; } + else + if $try_ln_s; then + echo "Symlink file $3" + else + echo "Copy file $3" + fi + fi +} + +# func_backup to +# makes a backup of a file that is about to be overwritten or replaced. +# 'to' is a relative pathname, relative to $srcdir. +func_backup () +{ + if $doit; then + if test -f "$srcdir/$1"; then + rm -f "$srcdir/$1~" + cp -p "$srcdir/$1" "$srcdir/$1~" + fi + fi +} + +# func_remove to +# removes a file. +# 'to' is a relative pathname, relative to $srcdir. +func_remove () +{ + if $doit; then + echo "Removing $1" + rm -f "$srcdir/$1" + else + echo "Remove $1" + fi +} + +# func_ChangeLog_init +# func_ChangeLog_add_entry line +# func_ChangeLog_finish +# manage the ChangeLog file, relative to $srcdir. +func_ChangeLog_init () +{ + modified_ChangeLog= +} +func_ChangeLog_add_entry () +{ + if $doit; then + if test -z "$modified_ChangeLog"; then + echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/ChangeLog.tmp" + echo >> "$srcdir/ChangeLog.tmp" + modified_ChangeLog=yes + fi + echo "$1" >> "$srcdir/ChangeLog.tmp" + else + modified_ChangeLog=yes + fi +} +func_ChangeLog_finish () +{ + if test -n "$modified_ChangeLog"; then + if $doit; then + echo >> "$srcdir/ChangeLog.tmp" + if test -f "$srcdir/ChangeLog"; then + echo "Adding an entry to ChangeLog (backup is in ChangeLog~)" + cat "$srcdir/ChangeLog" >> "$srcdir/ChangeLog.tmp" + rm -f "$srcdir/ChangeLog~" + cp -p "$srcdir/ChangeLog" "$srcdir/ChangeLog~" + else + echo "Creating ChangeLog" + fi + cp "$srcdir/ChangeLog.tmp" "$srcdir/ChangeLog" + rm -f "$srcdir/ChangeLog.tmp" + else + if test -f "$srcdir/ChangeLog"; then + echo "Add an entry to ChangeLog" + else + echo "Create ChangeLog" + fi + fi + fi +} + +# func_poChangeLog_init +# func_poChangeLog_add_entry line +# func_poChangeLog_finish +# manage the $podir/ChangeLog file, relative to $srcdir. +func_poChangeLog_init () +{ + modified_poChangeLog= +} +func_poChangeLog_add_entry () +{ + if $doit; then + if test -z "$modified_poChangeLog"; then + echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/$podir/ChangeLog.tmp" + echo >> "$srcdir/$podir/ChangeLog.tmp" + modified_poChangeLog=yes + fi + echo "$1" >> "$srcdir/$podir/ChangeLog.tmp" + else + modified_poChangeLog=yes + fi +} +func_poChangeLog_finish () +{ + if test -n "$modified_poChangeLog"; then + if $doit; then + echo >> "$srcdir/$podir/ChangeLog.tmp" + if test -f "$srcdir/$podir/ChangeLog"; then + echo "Adding an entry to $podir/ChangeLog (backup is in $podir/ChangeLog~)" + cat "$srcdir/$podir/ChangeLog" >> "$srcdir/$podir/ChangeLog.tmp" + rm -f "$srcdir/$podir/ChangeLog~" + cp -p "$srcdir/$podir/ChangeLog" "$srcdir/$podir/ChangeLog~" + else + echo "Creating $podir/ChangeLog" + fi + cp "$srcdir/$podir/ChangeLog.tmp" "$srcdir/$podir/ChangeLog" + rm -f "$srcdir/$podir/ChangeLog.tmp" + else + if test -f "$srcdir/$podir/ChangeLog"; then + echo "Add an entry to $podir/ChangeLog" + else + echo "Create $podir/ChangeLog" + fi + fi + fi +} + +# func_m4ChangeLog_init +# func_m4ChangeLog_add_entry line +# func_m4ChangeLog_finish +# manage the $m4dir/ChangeLog file, relative to $srcdir. +func_m4ChangeLog_init () +{ + if test -n "$using_m4ChangeLog"; then + modified_m4ChangeLog= + created_m4ChangeLog= + fi +} +func_m4ChangeLog_add_entry () +{ + if test -n "$using_m4ChangeLog"; then + if $doit; then + if test -z "$modified_m4ChangeLog"; then + echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/$m4dir/ChangeLog.tmp" + echo >> "$srcdir/$m4dir/ChangeLog.tmp" + modified_m4ChangeLog=yes + fi + echo "$1" >> "$srcdir/$m4dir/ChangeLog.tmp" + else + modified_m4ChangeLog=yes + fi + else + line="$1" + line=`echo "$line" | sed -e "s%^ \\* % * $m4dir/%"` + func_ChangeLog_add_entry "$line" + fi +} +func_m4ChangeLog_finish () +{ + if test -n "$using_m4ChangeLog"; then + if test -n "$modified_m4ChangeLog"; then + if $doit; then + echo >> "$srcdir/$m4dir/ChangeLog.tmp" + if test -f "$srcdir/$m4dir/ChangeLog"; then + echo "Adding an entry to $m4dir/ChangeLog (backup is in $m4dir/ChangeLog~)" + cat "$srcdir/$m4dir/ChangeLog" >> "$srcdir/$m4dir/ChangeLog.tmp" + rm -f "$srcdir/$m4dir/ChangeLog~" + cp -p "$srcdir/$m4dir/ChangeLog" "$srcdir/$m4dir/ChangeLog~" + else + echo "Creating $m4dir/ChangeLog" + created_m4ChangeLog=yes + fi + cp "$srcdir/$m4dir/ChangeLog.tmp" "$srcdir/$m4dir/ChangeLog" + rm -f "$srcdir/$m4dir/ChangeLog.tmp" + else + if test -f "$srcdir/$m4dir/ChangeLog"; then + echo "Add an entry to $m4dir/ChangeLog" + else + echo "Create $m4dir/ChangeLog" + created_m4ChangeLog=yes + fi + fi + fi + fi +} +using_m4ChangeLog=yes + +if test ! -f "$srcdir/intl/Makefile.in" && test -n "$intldir"; then + added_acoutput="$added_acoutput intl/Makefile" +fi +if test -f "$srcdir/intl/Makefile.in" && test -z "$intldir"; then + removed_acoutput="$removed_acoutput intl/Makefile" +fi +if test -d "$srcdir/intl"; then + # Remove everything inside intl except for RCS and CVS subdirs and invisible + # files. + if $doit; then + echo "Wiping out intl/ subdirectory" + (cd "$srcdir/intl" && + for f in *; do + if test CVS != "$f" && test RCS != "$f"; then + rm -rf "$f" + fi + done) + else + echo "Wipe out intl/ subdirectory" + fi + if test -z "$intldir"; then + removed_directory=intl + fi +else + if test -n "$intldir"; then + if $doit; then + echo "Creating intl/ subdirectory" + mkdir "$srcdir/intl" || func_fatal_error "failed to create intl/ subdirectory" + else + echo "Create intl/ subdirectory" + fi + added_directories="$added_directories intl" + fi +fi + +$do_changelog && func_ChangeLog_init + +for podir in $podirs; do + test -d "$srcdir/$podir" || { + if $doit; then + echo "Creating $podir/ subdirectory" + mkdir "$srcdir/$podir" || func_fatal_error "failed to create $podir/ subdirectory" + else + echo "Create $podir/ subdirectory" + fi + added_directories="$added_directories $podir" + } +done + +# Create the directory for config.rpath, if needed. +# This is for consistency with autoreconf and automake. +# Note that $auxdir is either empty or ends in a slash. +test -d "$srcdir/$auxdir" || { + if $doit; then + echo "Creating $auxdir subdirectory" + mkdir "$srcdir/$auxdir" || func_fatal_error "failed to create $auxdir subdirectory" + else + echo "Create $auxdir subdirectory" + fi +} + +# Now copy all files. Take care for the destination directories. +for file in *; do + case $file in + ABOUT-NLS) + func_linkorcopy $file "$gettext_dir/$file" $file + ;; + config.rpath) + if test -f "$srcdir/$auxdir$file"; then + : + else + added_extradist="$added_extradist $auxdir$file" + fi + func_linkorcopy $file "$gettext_dir/$file" "$auxdir$file" + ;; + esac +done + +# Copy files to intl/ subdirectory. +if test -n "$intldir"; then + cd intl + for file in *; do + if test $file != COPYING.LIB-2.0 && test $file != COPYING.LIB-2.1; then + if test $file != plural.c; then + func_linkorcopy $file "$gettext_dir/intl/$file" intl/$file + else + # plural.c is a generated file; it must be copied and touched. + func_copy $file intl/$file + if $doit; then + (sleep 2; touch "$srcdir/intl/$file") & + fi + fi + fi + done + cd .. +else + echo "Not copying intl/ directory." + # Tell the user what to put into configure.ac, if it is not already there. + if grep '^AM_GNU_GETTEXT([[]\?external[]]\?[ ]*[,)]' "$srcdir/$configure_in" > /dev/null; then + : + else + please="$please +Please use AM_GNU_GETTEXT([external]) in order to cause autoconfiguration +to look for an external libintl. +" + fi +fi + +# Copy files to po/ subdirectory. +cd po +for podir in $podirs; do + $do_changelog && func_poChangeLog_init + for file in Makefile.in.in; do + same=no + if test -f "$srcdir/$podir/$file"; then + if cmp -s $file "$srcdir/$podir/$file"; then + same=yes + fi + else + added_acoutput="$added_acoutput $podir/Makefile.in" + fi + if $do_changelog && test $same = no; then + if test -f "$srcdir/$podir/$file"; then + func_poChangeLog_add_entry " * $file: Upgrade to gettext-${version}." + else + func_poChangeLog_add_entry " * $file: New file, from gettext-${version}." + fi + fi + func_backup "$podir/$file" + func_linkorcopy $file "$gettext_dir/po/$file" "$podir/$file" + done + for file in *; do + case $file in + Makefile.in.in) + # Already handled above. + ;; + Makevars.template) + func_linkorcopy Makevars.template "$gettext_dir/po/Makevars.template" "$podir/Makevars.template" + if test -f "$srcdir/po/Makevars"; then + LC_ALL=C sed -n -e 's/[ ]*\([A-Za-z0-9_]*\)[ ]*=.*/\1/p' < "$srcdir/$podir/Makevars" | LC_ALL=C sort > "$srcdir/$podir/Makevars.tmp1" + LC_ALL=C sed -n -e 's/[ ]*\([A-Za-z0-9_]*\)[ ]*=.*/\1/p' < "$srcdir/$podir/Makevars.template" | LC_ALL=C sort > "$srcdir/$podir/Makevars.tmp2" + missingvars=`LC_ALL=C comm -13 "$srcdir/$podir/Makevars.tmp1" "$srcdir/$podir/Makevars.tmp2"` + rm -f "$srcdir/$podir/Makevars.tmp1" "$srcdir/$podir/Makevars.tmp2" + if test -n "$missingvars"; then + please="$please +Please update $podir/Makevars so that it defines all the variables mentioned +in $podir/Makevars.template. +You can then remove $podir/Makevars.template. +" + fi + else + please="$please +Please create $podir/Makevars from the template in $podir/Makevars.template. +You can then remove $podir/Makevars.template. +" + fi + ;; + *) + same=no + if test -f "$srcdir/$podir/$file"; then + if cmp -s $file "$srcdir/$podir/$file"; then + same=yes + fi + fi + if $do_changelog && test $same = no; then + if test -f "$srcdir/$podir/$file"; then + func_poChangeLog_add_entry " * $file: Upgrade to gettext-${version}." + else + func_poChangeLog_add_entry " * $file: New file, from gettext-${version}." + fi + fi + func_backup "$podir/$file" + func_linkorcopy $file "$gettext_dir/po/$file" "$podir/$file" + ;; + esac + done + if test -f "$srcdir/$podir/cat-id-tbl.c"; then + func_remove "$podir/cat-id-tbl.c" + $do_changelog && func_poChangeLog_add_entry " * cat-id-tbl.c: Remove file." + fi + if test -f "$srcdir/$podir/stamp-cat-id"; then + func_remove "$podir/stamp-cat-id" + $do_changelog && func_poChangeLog_add_entry " * stamp-cat-id: Remove file." + fi + if test ! -f "$srcdir/$podir/POTFILES.in"; then + if $doit; then + echo "Creating initial $podir/POTFILES.in" + echo '# List of source files which contain translatable strings.' > "$srcdir/$podir/POTFILES.in" + else + echo "Create initial $podir/POTFILES.in" + fi + $do_changelog && func_poChangeLog_add_entry " * POTFILES.in: New file." + please="$please +Please fill $podir/POTFILES.in as described in the documentation. +" + fi + $do_changelog && func_poChangeLog_finish +done + +# Determine whether we can assume automake 1.9 or newer. +have_automake19= +if (aclocal --version) >/dev/null 2>/dev/null; then + aclocal_version=`aclocal --version | sed -n -e 1p | sed -e 's/^[^0-9]*//'` + case $aclocal_version in + 1.9* | 1.[1-9][0-9]* | [2-9]*) have_automake19=yes ;; + esac +fi + +m4filelist='gettext.m4 iconv.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 + po.m4 progtest.m4' +# With aclocal versions < 1.9 we need all m4 files, otherwise "aclocal -I m4" +# might give an error. (aclocal < 1.9 didn't know which macros are really +# needed, it looked which macros are potentially needed.) +min_automake_version=1.9 +if test -n "$intldir" || test -z "$have_automake19"; then + # Add intldir.m4, intl.m4 and its dependencies. + m4filelist=$m4filelist' codeset.m4 fcntl-o.m4 glibc2.m4 glibc21.m4 intdiv0.m4 + intl.m4 intldir.m4 intlmacosx.m4 intmax.m4 inttypes_h.m4 inttypes-pri.m4 + lcmessage.m4 lock.m4 longlong.m4 printf-posix.m4 size_max.m4 stdint_h.m4 + threadlib.m4 uintmax_t.m4 visibility.m4 wchar_t.m4 wint_t.m4 xsize.m4' + min_automake_version=1.8 +fi + +# All sorts of bugs could occur if the configure file was remade with the wrong +# version of gettext.m4 et al. (because then the configure and the po/Makefile.in.in +# don't fit together). It is therefore important that the package carries the +# right versions of gettext.m4 et al. with it. +if test -f "$srcdir/Makefile.am"; then + # A package using automake. + + # Determine whether it's using automake 1.8 or newer. + have_automake18= + if (aclocal --version) >/dev/null 2>/dev/null; then + aclocal_version=`aclocal --version | sed -n -e 1p | sed -e 's/^[^0-9]*//'` + case $aclocal_version in + 1.[8-9]* | 1.[1-9][0-9]* | [2-9]*) have_automake18=yes ;; + esac + fi + + # Extract the macro directory name from Makefile.am. + aclocal_amflags=`grep '^ACLOCAL_AMFLAGS[ ]*=' "$srcdir/Makefile.am" | sed -e 's/^ACLOCAL_AMFLAGS[ ]*=\(.*\)$/\1/'` + m4dir=m4 + m4dir_defaulted=yes + m4dir_is_next= + for arg in $aclocal_amflags; do + if test -n "$m4dir_is_next"; then + # Ignore absolute directory pathnames, like /usr/local/share/aclocal. + case "$arg" in + /*) ;; + *) + m4dir="$arg" + m4dir_defaulted= + break + ;; + esac + m4dir_is_next= + else + if test "X$arg" = "X-I"; then + m4dir_is_next=yes + else + m4dir_is_next= + fi + fi + done + + # Decide whether to use $m4dir/ChangeLog, or to use ChangeLog instead. + if test -d "$srcdir/$m4dir" && test -f "$srcdir/ChangeLog" && test ! -f "$srcdir/$m4dir/ChangeLog"; then + # The programmer has no $m4dir/ChangeLog so far. Don't introduce one. + using_m4ChangeLog= + fi + + # Update the *.m4 files and the corresponding Makefile.am. + $do_changelog && func_m4ChangeLog_init + added_m4dir= + added_m4files= + if test -d "$srcdir/$m4dir"; then + : + else + if $doit; then + echo "Creating directory $m4dir" + mkdir "$srcdir/$m4dir" + else + echo "Create directory $m4dir" + fi + added_m4dir=yes + fi + for file in $m4filelist; do + same=no + if test -f "$srcdir/$m4dir/$file"; then + if cmp -s "${datarootdir}/aclocal/$file" "$srcdir/$m4dir/$file"; then + same=yes + fi + else + added_m4files="$added_m4files $file" + fi + if $do_changelog && test $same = no; then + if test -f "$srcdir/$m4dir/$file"; then + func_m4ChangeLog_add_entry " * $file: Upgrade to gettext-${version}." + else + func_m4ChangeLog_add_entry " * $file: New file, from gettext-${version}." + fi + fi + func_backup "$m4dir/$file" + func_linkorcopy "${datarootdir}/aclocal/$file" "${datarootdir}/aclocal/$file" "$m4dir/$file" + done + missing_m4Makefileam= + if test -n "$added_m4files"; then + if test -f "$srcdir/$m4dir/Makefile.am"; then + if $doit; then + echo "Updating EXTRA_DIST in $m4dir/Makefile.am (backup is in $m4dir/Makefile.am~)" + func_backup "$m4dir/Makefile.am" + rm -f "$srcdir/$m4dir/Makefile.am" + if grep '^EXTRA_DIST[ ]*=' "$srcdir/$m4dir/Makefile.am~" > /dev/null; then + sed -e "s%^\(EXTRA_DIST[ ]*=\) \\?%\\1$added_m4files %" < "$srcdir/$m4dir/Makefile.am~" > "$srcdir/$m4dir/Makefile.am" + $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST): Add the new files." + else + (cat "$srcdir/$m4dir/Makefile.am~"; echo; echo "EXTRA_DIST =$added_m4files") > "$srcdir/$m4dir/Makefile.am" + $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST): New variable." + fi + else + echo "Update EXTRA_DIST in $m4dir/Makefile.am" + $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST)." + fi + else + # $m4dir/Makefile.am is not needed any more when aclocal 1.8 or newer + # is used. + if test -z "$have_automake18"; then + if $doit; then + echo "Creating $m4dir/Makefile.am" + echo "EXTRA_DIST =$added_m4files" > "$srcdir/$m4dir/Makefile.am" + else + echo "Create $m4dir/Makefile.am" + fi + $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am: New file." + added_acoutput="$added_acoutput $m4dir/Makefile" + else + missing_m4Makefileam=yes + fi + fi + fi + if test -n "$added_m4dir" && test -z "$missing_m4Makefileam"; then + added_directories="$added_directories $m4dir" + fi + $do_changelog && func_m4ChangeLog_finish + # automake will arrange for $m4dir/ChangeLog to be distributed if a + # $m4dir/Makefile.am exists. If not, we need to add it to Makefile.am's + # EXTRA_DIST explicitly. + if test -n "$created_m4ChangeLog" && test -n "$missing_m4Makefileam"; then + added_extradist="$added_extradist $m4dir/ChangeLog" + fi + + # Update the top-level Makefile.am. + modified_Makefile_am= + # func_modify_Makefile_am changelog_comment + # assumes a modified copy of $srcdir/Makefile.am in $srcdir/Makefile.am.tmp + # and replaces the original Makefile.am file with the modified one if + # the two files differ. Then it removes the modified copy. + func_modify_Makefile_am () + { + if cmp -s "$srcdir/Makefile.am" "$srcdir/Makefile.am.tmp"; then + : + else + if test -z "$modified_Makefile_am"; then + if $doit; then + echo "Updating Makefile.am (backup is in Makefile.am~)" + func_backup Makefile.am + else + echo "Update Makefile.am" + fi + fi + if $doit; then + rm -f "$srcdir/Makefile.am" + cp "$srcdir/Makefile.am.tmp" "$srcdir/Makefile.am" + fi + if $do_changelog; then + if test -z "$modified_Makefile_am"; then + func_ChangeLog_add_entry " * Makefile.am $1" + else + func_ChangeLog_add_entry " $1" + fi + fi + modified_Makefile_am=yes + fi + rm -f "$srcdir/Makefile.am.tmp" + } + + if test -n "$added_directories"; then + if grep '^SUBDIRS[ ]*=' "$srcdir/Makefile.am" > /dev/null; then + sed -e "s%^\(SUBDIRS[ ]*=\) \\?%\\1$added_directories %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" + added_directories_pretty=`echo $added_directories | sed -e 's/ /, /g'` + func_modify_Makefile_am "(SUBDIRS): Add $added_directories_pretty." + else + (cat "$srcdir/Makefile.am"; echo; echo "SUBDIRS =$added_directories") > "$srcdir/Makefile.am.tmp" + func_modify_Makefile_am "(SUBDIRS): New variable." + fi + fi + if test -n "$removed_directory"; then + sed -e '/^SUBDIRS[ ]*=/ { + :a + s%\([ ]\)'"$removed_directory"'[ ]%\1% + s%[ ]'"$removed_directory"'$%% + tb + :b + s%\\$%\\% + tc + bd + :c + n + ba + :d + }' < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" + func_modify_Makefile_am "(SUBDIRS): Remove $removed_directory." + fi + if test -n "$added_directories"; then + if grep '^DIST_SUBDIRS[ ]*=' "$srcdir/Makefile.am" > /dev/null; then + sed -e "s%^\(DIST_SUBDIRS[ ]*=\) \\?%\\1$added_directories %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" + added_directories_pretty=`echo $added_directories | sed -e 's/ /, /g'` + func_modify_Makefile_am "(DIST_SUBDIRS): Add $added_directories_pretty." + fi + fi + if test -n "$removed_directory"; then + sed -e '/^DIST_SUBDIRS[ ]*=/ { + :a + s%\([ ]\)'"$removed_directory"'[ ]%\1% + s%[ ]'"$removed_directory"'$%% + tb + :b + s%\\$%\\% + tc + bd + :c + n + ba + :d + }' < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" + func_modify_Makefile_am "(DIST_SUBDIRS): Remove $removed_directory." + fi + if test -n "$m4dir_defaulted"; then + if grep '^ACLOCAL_AMFLAGS[ ]*=' "$srcdir/Makefile.am" > /dev/null; then + sed -e "s%^\(ACLOCAL_AMFLAGS[ ]*=\) \\?%\\1 -I $m4dir %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" + func_modify_Makefile_am "(ACLOCAL_AMFLAGS): Add -I $m4dir." + else + (cat "$srcdir/Makefile.am"; echo; echo "ACLOCAL_AMFLAGS = -I $m4dir") > "$srcdir/Makefile.am.tmp" + func_modify_Makefile_am "(ACLOCAL_AMFLAGS): New variable." + fi + # Also update Makefile.in and, if existent, Makefile. Otherwise they + # would take into account the new flags only after a few rounds of + # "./configure", "make", "touch configure.in", "make distclean". + if $doit; then + for file in Makefile.in Makefile; do + if test -f "$srcdir/$file"; then + func_backup $file + rm -f "$srcdir/$file" + sed -e "s%(ACLOCAL)%(ACLOCAL) -I $m4dir%" < "$srcdir/$file~" > "$srcdir/$file" + fi + done + fi + fi + if test -n "$added_extradist"; then + if grep '^EXTRA_DIST[ ]*=' "$srcdir/Makefile.am" > /dev/null; then + sed -e "s%^\(EXTRA_DIST[ ]*=\)%\\1$added_extradist %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" + added_extradist_pretty=`echo $added_extradist | sed -e 's/ /, /g'` + func_modify_Makefile_am "(EXTRA_DIST): Add $added_extradist_pretty." + else + (cat "$srcdir/Makefile.am"; echo; echo "EXTRA_DIST =$added_extradist") > "$srcdir/Makefile.am.tmp" + func_modify_Makefile_am "(EXTRA_DIST): New variable." + fi + fi + # Extract the aclocal options name from Makefile.am. + aclocal_amflags=`grep '^ACLOCAL_AMFLAGS[ ]*=' "$srcdir/Makefile.am" | sed -e 's/^ACLOCAL_AMFLAGS[ ]*=\(.*\)$/\1/'` + aclocal_options= + m4dir_is_next= + for arg in $aclocal_amflags; do + if test -n "$m4dir_is_next"; then + aclocal_options="$aclocal_options -I $arg" + m4dir_is_next= + else + if test "X$arg" = "X-I"; then + m4dir_is_next=yes + else + m4dir_is_next= + fi + fi + done + please="$please +Please run 'aclocal$aclocal_options' to regenerate the aclocal.m4 file. +You need aclocal from GNU automake $min_automake_version (or newer) to do this. +Then run 'autoconf' to regenerate the configure file. +" + + # Also create $m4dir/Makefile.in from $m4dir/Makefile.am, because automake + # doesn't do it by itself. + if $doit; then + case "$added_acoutput" in + *" $m4dir/Makefile") + (cd "$srcdir" && automake "$m4dir/Makefile") 2>/dev/null || + please="$please +Please run 'automake $m4dir/Makefile' to create $m4dir/Makefile.in +" + ;; + esac + fi +else + please="$please +Please add the files +$m4filelist +from the ${datarootdir}/aclocal directory to your aclocal.m4 file. +" +fi + +modified_configure_in= +# func_modify_configure_in changelog_comment +# assumes a modified copy of $srcdir/$configure_in in $srcdir/$configure_in.tmp +# and replaces the original configure.in/ac file with the modified one if +# the two files differ. Then it removes the modified copy. +func_modify_configure_in () +{ + if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then + : + else + if test -z "$modified_configure_in"; then + if $doit; then + echo "Updating $configure_in (backup is in $configure_in~)" + func_backup $configure_in + else + echo "Update $configure_in" + fi + fi + if $doit; then + rm -f "$srcdir/$configure_in" + cp "$srcdir/$configure_in.tmp" "$srcdir/$configure_in" + fi + if $do_changelog; then + if test -z "$modified_configure_in"; then + func_ChangeLog_add_entry " * $configure_in $1" + else + func_ChangeLog_add_entry " $1" + fi + fi + modified_configure_in=yes + fi + rm -f "$srcdir/$configure_in.tmp" +} + +if test -n "$added_acoutput"; then + if grep '^AC_CONFIG_FILES(' "$srcdir/$configure_in" > /dev/null; then + sedprog=' +ta +b +:a +n +ba' + sed -e "s%^\\(AC_CONFIG_FILES([^])\\,]*\\)%\\1$added_acoutput%$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" + added_acoutput_pretty=`echo $added_acoutput | sed -e 's/ /, /g'` + func_modify_configure_in "(AC_CONFIG_FILES): Add $added_acoutput_pretty." + else + if grep '^AC_OUTPUT(' "$srcdir/$configure_in" > /dev/null; then + sed -e "s%^\\(AC_OUTPUT([^])\\,]*\\)%\\1$added_acoutput%" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" + added_acoutput_pretty=`echo $added_acoutput | sed -e 's/ /, /g'` + func_modify_configure_in "(AC_OUTPUT): Add $added_acoutput_pretty." + else + please="$please +Please add$added_acoutput to the AC_OUTPUT or AC_CONFIG_FILES invocation in the $configure_in file. +" + fi + fi +fi +if test -n "$removed_acoutput"; then + for file in $removed_acoutput; do + tag= + sedprog='{ + s%\([[ ]\)'"$file"'[ ]%\1% + s%\([[ ]\)'"$file"'\([]),]\)%\1\2% + s%[[ ]'"$file"'$%% + :a + tb + :b + s%\\$%\\% + tc + bd + :c + n + s%\([ ]\)'"$file"'[ ]%\1% + s%\([ ]\)'"$file"'\([]),]\)%\1\2% + s%[ ]'"$file"'$%% + ba + :d + }' + sed -e '/^AC_CONFIG_FILES(/'"$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" + if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then + sed -e '/^AC_OUTPUT(/'"$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" + if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then + : + else + tag=AC_OUTPUT + fi + else + tag=AC_CONFIG_FILES + fi + if test -n "$tag"; then + func_modify_configure_in "($tag): Remove $file." + else + rm -f "$srcdir/$configure_in.tmp" + if test "$file" != intl/intlh.inst; then + please="$please +Please remove $file from the AC_OUTPUT or AC_CONFIG_FILES invocation +in the $configure_in file. +" + fi + fi + done +fi +sed -e 's%sed -e "/POTFILES =/r po/POTFILES" po/Makefile\.in > po/Makefile *;* *%%' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" +func_modify_configure_in "(AC_OUTPUT): Remove command that created po/Makefile." +sed -e '/^\(dnl \|\)AC_LINK_FILES(\$nls_cv_header_libgt, \$nls_cv_header_intl)$/d' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" +func_modify_configure_in "(AC_LINK_FILES): Remove invocation." +sed -e 's/^AM_GNU_GETTEXT_VERSION([^()]*)/AM_GNU_GETTEXT_VERSION(['"$version"'])/' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" +func_modify_configure_in "(AM_GNU_GETTEXT_VERSION): Bump to $version." +$do_changelog && func_ChangeLog_finish + +# Recommend replacement for deprecated Makefile variables. +use_libtool=`cat "$srcdir/$configure_in" | grep '^A[CM]_PROG_LIBTOOL'` +for file in `(cd "$srcdir"; find . -name Makefile.am -print; find . -name Makefile.in -print) | sed -e 's,^\./,,'`; do + if test -f "$srcdir/$file"; then + if test `echo "$file" | sed -e 's,^.*/,,'` = Makefile.in && grep automake "$srcdir/$file" >/dev/null 2>&1; then + continue; + fi + # INTLLIBS is deprecated because it doesn't distinguish the two + # cases: with libtool, without libtool. + if grep '@''INTLLIBS''@' "$srcdir/$file" >/dev/null 2>&1; then + if test -n "$use_libtool"; then + please="$please +Please change $file to use @""LTLIBINTL""@ or @""LIBINTL""@ instead of +@""INTLLIBS""@. Which one, depends whether it is used with libtool or not. +@""INTLLIBS""@ will go away. +" + else + please="$please +Please change $file to use @""LIBINTL""@ instead of @""INTLLIBS""@. +@""INTLLIBS""@ will go away. +" + fi + fi + # DATADIRNAME is deprecated because we install only .gmo files nowadays, + # which can be stored in the platform independent $prefix/share hierarchy. + if grep '@''DATADIRNAME''@' "$srcdir/$file" >/dev/null 2>&1; then + please="$please +Please change $file to use the constant string \"share\" instead of +@""DATADIRNAME""@. @""DATADIRNAME""@ will go away. +" + fi + # INSTOBJEXT is deprecated because we install only .gmo files nowadays, + # no catgets .cat catalogs. + if grep '@''INSTOBJEXT''@' "$srcdir/$file" >/dev/null 2>&1; then + please="$please +Please change $file to use the constant string \".mo\" instead of +@""INSTOBJEXT""@. @""INSTOBJEXT""@ will go away. +" + fi + # GENCAT is deprecated because we install no catgets catalogs anymore. + if grep '@''GENCAT''@' "$srcdir/$file" >/dev/null 2>&1; then + please="$please +Please change $file to use the constant string \"gencat\" instead of +@""GENCAT""@. @""GENCAT""@ will go away. Maybe you don't even need it any more? +" + fi + # POSUB is deprecated because it causes "./configure --disable-nls", "make", + # "make dist" to create a buggy tarfile. + if grep '@''POSUB''@' "$srcdir/$file" >/dev/null 2>&1; then + please="$please +Please change $file to use the constant string \"po\" instead of +@""POSUB""@. @""POSUB""@ will go away. +" + fi + fi +done + +# Recommend replacement for deprecated configure variables. +if grep '\$nls_cv_header_' "$srcdir/$configure_in" >/dev/null 2>&1; then + please="$please +Please stop using \$nls_cv_header_intl or \$nls_cv_header_libgt in the +$configure_in file. Both will go away. Use <libintl.h> or \"gettext.h\" instead. +" +fi + +# Recommend fetching config.guess and config.sub. +if test -f "$srcdir/$auxdir"config.guess && test -f "$srcdir/$auxdir"config.sub; then + : +else + please="$please +You will also need config.guess and config.sub, which you can get from the CVS +of the 'config' project at http://savannah.gnu.org/. The commands to fetch them +are +\$ wget 'http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess' +\$ wget 'http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub' +" +fi + +if $doit; then + echo "$please" + echo "You might also want to copy the convenience header file gettext.h" + echo "from the $gettext_dir directory into your package." + echo "It is a wrapper around <libintl.h> that implements the configure --disable-nls" + echo "option." + echo + count=`echo "$please" | grep '^$' | wc -l` + count=`echo "$count" | sed -e 's/[ ]//g'` + case "$count" in + 1) count="paragraph";; + 2) count="two paragraphs";; + 3) count="three paragraphs";; + 4) count="four paragraphs";; + 5) count="five paragraphs";; + *) count="$count paragraphs";; + esac + echo "Press Return to acknowledge the previous $count." + # Read from /dev/tty, not stdin, so that gettextize cannot be abused by + # non-interactive tools. + read dummy < /dev/tty +fi + +exit 0 |