diff options
author | pommicket <pommicket@gmail.com> | 2022-02-23 22:37:01 -0800 |
---|---|---|
committer | pommicket <pommicket@gmail.com> | 2022-02-23 22:37:01 -0800 |
commit | c75af0c8e5fdf7792081f03ca8a01764953b19a4 (patch) | |
tree | 811fcdb32086c0b5b4a41f18031c8fcde65ca4b6 /05/musl-0.6.0/include | |
parent | 9bc8a11afeed3569736b89754012e3ca22ee10f6 (diff) |
coda
Diffstat (limited to '05/musl-0.6.0/include')
-rw-r--r-- | 05/musl-0.6.0/include/dirent.h | 27 | ||||
-rw-r--r-- | 05/musl-0.6.0/include/stdarg.h | 88 | ||||
-rw-r--r-- | 05/musl-0.6.0/include/sys/mtio.h | 276 |
3 files changed, 390 insertions, 1 deletions
diff --git a/05/musl-0.6.0/include/dirent.h b/05/musl-0.6.0/include/dirent.h index a917093..2e8c996 100644 --- a/05/musl-0.6.0/include/dirent.h +++ b/05/musl-0.6.0/include/dirent.h @@ -34,6 +34,33 @@ int dirfd(DIR *); int alphasort(const struct dirent **, const struct dirent **); int scandir(const char *, struct dirent ***, int (*)(const struct dirent *), int (*)(const struct dirent **, const struct dirent **)); +/* File types for `d_type'. */ +enum + { + DT_UNKNOWN = 0, +# define DT_UNKNOWN DT_UNKNOWN + DT_FIFO = 1, +# define DT_FIFO DT_FIFO + DT_CHR = 2, +# define DT_CHR DT_CHR + DT_DIR = 4, +# define DT_DIR DT_DIR + DT_BLK = 6, +# define DT_BLK DT_BLK + DT_REG = 8, +# define DT_REG DT_REG + DT_LNK = 10, +# define DT_LNK DT_LNK + DT_SOCK = 12, +# define DT_SOCK DT_SOCK + DT_WHT = 14 +# define DT_WHT DT_WHT + }; + +/* Convert between stat structure types and directory types. */ +# define IFTODT(mode) (((mode) & 0170000) >> 12) +# define DTTOIF(dirtype) ((dirtype) << 12) + #ifdef __cplusplus extern } #endif diff --git a/05/musl-0.6.0/include/stdarg.h b/05/musl-0.6.0/include/stdarg.h index 0d915ab..1a455d2 100644 --- a/05/musl-0.6.0/include/stdarg.h +++ b/05/musl-0.6.0/include/stdarg.h @@ -1 +1,87 @@ -#include "/usr/local/tcc-bootstrap/include/stdarg.h" +#ifndef _STDARG_H +#define _STDARG_H + +#ifdef __GNUC__ +#define va_list __builtin_va_list +#define va_arg __builtin_va_arg +#define va_start __builtin_va_start +#define va_end __builtin_va_end +#define va_copy __builtin_va_copy +#else +#ifdef __x86_64__ +#ifndef _WIN64 + +//This should be in sync with the declaration on our lib/libtcc1.c +/* GCC compatible definition of va_list. */ +typedef struct { + unsigned int gp_offset; + unsigned int fp_offset; + union { + unsigned int overflow_offset; + char *overflow_arg_area; + }; + char *reg_save_area; +} __va_list_struct; + +typedef __va_list_struct va_list[1]; + +void __va_start(__va_list_struct *ap, void *fp); +void *__va_arg(__va_list_struct *ap, int arg_type, int size, int align); + +#define va_start(ap, last) __va_start(ap, __builtin_frame_address(0)) +#define va_arg(ap, type) \ + (*(type *)(__va_arg(ap, __builtin_va_arg_types(type), sizeof(type), __alignof__(type)))) +#define va_copy(dest, src) (*(dest) = *(src)) +#define va_end(ap) + +/* avoid conflicting definition for va_list on Macs. */ +#define _VA_LIST_T + +#else /* _WIN64 */ +typedef char *va_list; +#define va_start(ap,last) __builtin_va_start(ap,last) +#define va_arg(ap, t) ((sizeof(t) > 8 || (sizeof(t) & (sizeof(t) - 1))) \ + ? **(t **)((ap += 8) - 8) : *(t *)((ap += 8) - 8)) +#define va_copy(dest, src) ((dest) = (src)) +#define va_end(ap) +#endif + +#elif __arm__ +typedef char *va_list; +#define _tcc_alignof(type) ((int)&((struct {char c;type x;} *)0)->x) +#define _tcc_align(addr,type) (((unsigned)addr + _tcc_alignof(type) - 1) \ + & ~(_tcc_alignof(type) - 1)) +#define va_start(ap,last) ap = ((char *)&(last)) + ((sizeof(last)+3)&~3) +#define va_arg(ap,type) (ap = (void *) ((_tcc_align(ap,type)+sizeof(type)+3) \ + &~3), *(type *)(ap - ((sizeof(type)+3)&~3))) +#define va_copy(dest, src) (dest) = (src) +#define va_end(ap) + +#elif defined(__aarch64__) +typedef struct { + void *__stack; + void *__gr_top; + void *__vr_top; + int __gr_offs; + int __vr_offs; +} va_list; +#define va_start(ap, last) __va_start(ap, last) +#define va_arg(ap, type) __va_arg(ap, type) +#define va_end(ap) +#define va_copy(dest, src) ((dest) = (src)) + +#else /* __i386__ */ +typedef char *va_list; +/* only correct for i386 */ +#define va_start(ap,last) ap = ((char *)&(last)) + ((sizeof(last)+3)&~3) +#define va_arg(ap,type) (ap += (sizeof(type)+3)&~3, *(type *)(ap - ((sizeof(type)+3)&~3))) +#define va_copy(dest, src) (dest) = (src) +#define va_end(ap) +#endif + +/* fix a buggy dependency on GCC in libio.h */ +typedef va_list __gnuc_va_list; +#define _VA_LIST_DEFINED +#endif + +#endif /* _STDARG_H */ diff --git a/05/musl-0.6.0/include/sys/mtio.h b/05/musl-0.6.0/include/sys/mtio.h new file mode 100644 index 0000000..b77b7e7 --- /dev/null +++ b/05/musl-0.6.0/include/sys/mtio.h @@ -0,0 +1,276 @@ +/* Structures and definitions for magnetic tape I/O control commands. + Copyright (C) 1996-2020 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, see + <https://www.gnu.org/licenses/>. */ + +/* Written by H. Bergman <hennus@cybercomm.nl>. */ + +#ifndef _SYS_MTIO_H +#define _SYS_MTIO_H 1 + +/* Get necessary definitions from system and kernel headers. */ +#include <sys/types.h> +#include <sys/ioctl.h> + + +/* Structure for MTIOCTOP - magnetic tape operation command. */ +struct mtop + { + short int mt_op; /* Operations defined below. */ + int mt_count; /* How many of them. */ + }; +#define _IOT_mtop /* Hurd ioctl type field. */ \ + _IOT (_IOTS (short), 1, _IOTS (int), 1, 0, 0) + +/* Magnetic Tape operations [Not all operations supported by all drivers]. */ +#define MTRESET 0 /* +reset drive in case of problems. */ +#define MTFSF 1 /* Forward space over FileMark, + * position at first record of next file. */ +#define MTBSF 2 /* Backward space FileMark (position before FM). */ +#define MTFSR 3 /* Forward space record. */ +#define MTBSR 4 /* Backward space record. */ +#define MTWEOF 5 /* Write an end-of-file record (mark). */ +#define MTREW 6 /* Rewind. */ +#define MTOFFL 7 /* Rewind and put the drive offline (eject?). */ +#define MTNOP 8 /* No op, set status only (read with MTIOCGET). */ +#define MTRETEN 9 /* Retension tape. */ +#define MTBSFM 10 /* +backward space FileMark, position at FM. */ +#define MTFSFM 11 /* +forward space FileMark, position at FM. */ +#define MTEOM 12 /* Goto end of recorded media (for appending files). + MTEOM positions after the last FM, ready for + appending another file. */ +#define MTERASE 13 /* Erase tape -- be careful! */ + +#define MTRAS1 14 /* Run self test 1 (nondestructive). */ +#define MTRAS2 15 /* Run self test 2 (destructive). */ +#define MTRAS3 16 /* Reserved for self test 3. */ + +#define MTSETBLK 20 /* Set block length (SCSI). */ +#define MTSETDENSITY 21 /* Set tape density (SCSI). */ +#define MTSEEK 22 /* Seek to block (Tandberg, etc.). */ +#define MTTELL 23 /* Tell block (Tandberg, etc.). */ +#define MTSETDRVBUFFER 24 /* Set the drive buffering according to SCSI-2. + Ordinary buffered operation with code 1. */ +#define MTFSS 25 /* Space forward over setmarks. */ +#define MTBSS 26 /* Space backward over setmarks. */ +#define MTWSM 27 /* Write setmarks. */ + +#define MTLOCK 28 /* Lock the drive door. */ +#define MTUNLOCK 29 /* Unlock the drive door. */ +#define MTLOAD 30 /* Execute the SCSI load command. */ +#define MTUNLOAD 31 /* Execute the SCSI unload command. */ +#define MTCOMPRESSION 32/* Control compression with SCSI mode page 15. */ +#define MTSETPART 33 /* Change the active tape partition. */ +#define MTMKPART 34 /* Format the tape with one or two partitions. */ + +/* structure for MTIOCGET - mag tape get status command */ + +struct mtget + { + long int mt_type; /* Type of magtape device. */ + long int mt_resid; /* Residual count: (not sure) + number of bytes ignored, or + number of files not skipped, or + number of records not skipped. */ + /* The following registers are device dependent. */ + long int mt_dsreg; /* Status register. */ + long int mt_gstat; /* Generic (device independent) status. */ + long int mt_erreg; /* Error register. */ + /* The next two fields are not always used. */ + int mt_fileno; /* Number of current file on tape. */ + int mt_blkno; /* Current block number. */ + }; +#define _IOT_mtget /* Hurd ioctl type field. */ \ + _IOT (_IOTS (long), 7, 0, 0, 0, 0) + + +/* Constants for mt_type. Not all of these are supported, and + these are not all of the ones that are supported. */ +#define MT_ISUNKNOWN 0x01 +#define MT_ISQIC02 0x02 /* Generic QIC-02 tape streamer. */ +#define MT_ISWT5150 0x03 /* Wangtek 5150EQ, QIC-150, QIC-02. */ +#define MT_ISARCHIVE_5945L2 0x04 /* Archive 5945L-2, QIC-24, QIC-02?. */ +#define MT_ISCMSJ500 0x05 /* CMS Jumbo 500 (QIC-02?). */ +#define MT_ISTDC3610 0x06 /* Tandberg 6310, QIC-24. */ +#define MT_ISARCHIVE_VP60I 0x07 /* Archive VP60i, QIC-02. */ +#define MT_ISARCHIVE_2150L 0x08 /* Archive Viper 2150L. */ +#define MT_ISARCHIVE_2060L 0x09 /* Archive Viper 2060L. */ +#define MT_ISARCHIVESC499 0x0A /* Archive SC-499 QIC-36 controller. */ +#define MT_ISQIC02_ALL_FEATURES 0x0F /* Generic QIC-02 with all features. */ +#define MT_ISWT5099EEN24 0x11 /* Wangtek 5099-een24, 60MB, QIC-24. */ +#define MT_ISTEAC_MT2ST 0x12 /* Teac MT-2ST 155mb drive, + Teac DC-1 card (Wangtek type). */ +#define MT_ISEVEREX_FT40A 0x32 /* Everex FT40A (QIC-40). */ +#define MT_ISDDS1 0x51 /* DDS device without partitions. */ +#define MT_ISDDS2 0x52 /* DDS device with partitions. */ +#define MT_ISSCSI1 0x71 /* Generic ANSI SCSI-1 tape unit. */ +#define MT_ISSCSI2 0x72 /* Generic ANSI SCSI-2 tape unit. */ + +/* QIC-40/80/3010/3020 ftape supported drives. + 20bit vendor ID + 0x800000 (see vendors.h in ftape distribution). */ +#define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */ +#define MT_ISFTAPE_FLAG 0x800000 + +struct mt_tape_info + { + long int t_type; /* Device type id (mt_type). */ + char *t_name; /* Descriptive name. */ + }; + +#define MT_TAPE_INFO \ + { \ + {MT_ISUNKNOWN, "Unknown type of tape device"}, \ + {MT_ISQIC02, "Generic QIC-02 tape streamer"}, \ + {MT_ISWT5150, "Wangtek 5150, QIC-150"}, \ + {MT_ISARCHIVE_5945L2, "Archive 5945L-2"}, \ + {MT_ISCMSJ500, "CMS Jumbo 500"}, \ + {MT_ISTDC3610, "Tandberg TDC 3610, QIC-24"}, \ + {MT_ISARCHIVE_VP60I, "Archive VP60i, QIC-02"}, \ + {MT_ISARCHIVE_2150L, "Archive Viper 2150L"}, \ + {MT_ISARCHIVE_2060L, "Archive Viper 2060L"}, \ + {MT_ISARCHIVESC499, "Archive SC-499 QIC-36 controller"}, \ + {MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \ + {MT_ISWT5099EEN24, "Wangtek 5099-een24, 60MB"}, \ + {MT_ISTEAC_MT2ST, "Teac MT-2ST 155mb data cassette drive"}, \ + {MT_ISEVEREX_FT40A, "Everex FT40A, QIC-40"}, \ + {MT_ISSCSI1, "Generic SCSI-1 tape"}, \ + {MT_ISSCSI2, "Generic SCSI-2 tape"}, \ + {0, NULL} \ + } + + +/* Structure for MTIOCPOS - mag tape get position command. */ + +struct mtpos + { + long int mt_blkno; /* Current block number. */ + }; +#define _IOT_mtpos /* Hurd ioctl type field. */ \ + _IOT_SIMPLE (long) + + +/* Structure for MTIOCGETCONFIG/MTIOCSETCONFIG primarily intended + as an interim solution for QIC-02 until DDI is fully implemented. */ +struct mtconfiginfo + { + long int mt_type; /* Drive type. */ + long int ifc_type; /* Interface card type. */ + unsigned short int irqnr; /* IRQ number to use. */ + unsigned short int dmanr; /* DMA channel to use. */ + unsigned short int port; /* IO port base address. */ + + unsigned long int debug; /* Debugging flags. */ + + unsigned have_dens:1; + unsigned have_bsf:1; + unsigned have_fsr:1; + unsigned have_bsr:1; + unsigned have_eod:1; + unsigned have_seek:1; + unsigned have_tell:1; + unsigned have_ras1:1; + unsigned have_ras2:1; + unsigned have_ras3:1; + unsigned have_qfa:1; + + unsigned pad1:5; + char reserved[10]; + }; +#define _IOT_mtconfiginfo /* Hurd ioctl type field. */ \ + _IOT (_IOTS (long), 2, _IOTS (short), 3, _IOTS (long), 1) /* XXX wrong */ + + +/* Magnetic tape I/O control commands. */ +#define MTIOCTOP _IOW('m', 1, struct mtop) /* Do a mag tape op. */ +#define MTIOCGET _IOR('m', 2, struct mtget) /* Get tape status. */ +#define MTIOCPOS _IOR('m', 3, struct mtpos) /* Get tape position.*/ + +/* The next two are used by the QIC-02 driver for runtime reconfiguration. + See tpqic02.h for struct mtconfiginfo. */ +#define MTIOCGETCONFIG _IOR('m', 4, struct mtconfiginfo) /* Get tape config.*/ +#define MTIOCSETCONFIG _IOW('m', 5, struct mtconfiginfo) /* Set tape config.*/ + +/* Generic Mag Tape (device independent) status macros for examining + mt_gstat -- HP-UX compatible. + There is room for more generic status bits here, but I don't + know which of them are reserved. At least three or so should + be added to make this really useful. */ +#define GMT_EOF(x) ((x) & 0x80000000) +#define GMT_BOT(x) ((x) & 0x40000000) +#define GMT_EOT(x) ((x) & 0x20000000) +#define GMT_SM(x) ((x) & 0x10000000) /* DDS setmark */ +#define GMT_EOD(x) ((x) & 0x08000000) /* DDS EOD */ +#define GMT_WR_PROT(x) ((x) & 0x04000000) +/* #define GMT_ ? ((x) & 0x02000000) */ +#define GMT_ONLINE(x) ((x) & 0x01000000) +#define GMT_D_6250(x) ((x) & 0x00800000) +#define GMT_D_1600(x) ((x) & 0x00400000) +#define GMT_D_800(x) ((x) & 0x00200000) +/* #define GMT_ ? ((x) & 0x00100000) */ +/* #define GMT_ ? ((x) & 0x00080000) */ +#define GMT_DR_OPEN(x) ((x) & 0x00040000) /* Door open (no tape). */ +/* #define GMT_ ? ((x) & 0x00020000) */ +#define GMT_IM_REP_EN(x) ((x) & 0x00010000) /* Immediate report mode.*/ +/* 16 generic status bits unused. */ + + +/* SCSI-tape specific definitions. Bitfield shifts in the status */ +#define MT_ST_BLKSIZE_SHIFT 0 +#define MT_ST_BLKSIZE_MASK 0xffffff +#define MT_ST_DENSITY_SHIFT 24 +#define MT_ST_DENSITY_MASK 0xff000000 + +#define MT_ST_SOFTERR_SHIFT 0 +#define MT_ST_SOFTERR_MASK 0xffff + +/* Bitfields for the MTSETDRVBUFFER ioctl. */ +#define MT_ST_OPTIONS 0xf0000000 +#define MT_ST_BOOLEANS 0x10000000 +#define MT_ST_SETBOOLEANS 0x30000000 +#define MT_ST_CLEARBOOLEANS 0x40000000 +#define MT_ST_WRITE_THRESHOLD 0x20000000 +#define MT_ST_DEF_BLKSIZE 0x50000000 +#define MT_ST_DEF_OPTIONS 0x60000000 + +#define MT_ST_BUFFER_WRITES 0x1 +#define MT_ST_ASYNC_WRITES 0x2 +#define MT_ST_READ_AHEAD 0x4 +#define MT_ST_DEBUGGING 0x8 +#define MT_ST_TWO_FM 0x10 +#define MT_ST_FAST_MTEOM 0x20 +#define MT_ST_AUTO_LOCK 0x40 +#define MT_ST_DEF_WRITES 0x80 +#define MT_ST_CAN_BSR 0x100 +#define MT_ST_NO_BLKLIMS 0x200 +#define MT_ST_CAN_PARTITIONS 0x400 +#define MT_ST_SCSI2LOGICAL 0x800 + +/* The mode parameters to be controlled. Parameter chosen with bits 20-28. */ +#define MT_ST_CLEAR_DEFAULT 0xfffff +#define MT_ST_DEF_DENSITY (MT_ST_DEF_OPTIONS | 0x100000) +#define MT_ST_DEF_COMPRESSION (MT_ST_DEF_OPTIONS | 0x200000) +#define MT_ST_DEF_DRVBUFFER (MT_ST_DEF_OPTIONS | 0x300000) + +/* The offset for the arguments for the special HP changer load command. */ +#define MT_ST_HPLOADER_OFFSET 10000 + + +/* Specify default tape device. */ +#ifndef DEFTAPE +# define DEFTAPE "/dev/tape" +#endif + +#endif /* mtio.h */ |